Case for Ultrasonic Sensor - HC-SR04

Case for a HC-SR04 ultrasonic sensor. Using nuts and bolts was not an option so I made this simple case to hotglue the module onto my project.

The case was printed on an ultimaker. To print, in CURA, lay it flat on the printer bed and enable support. Make Sure to set "support placement" to "touching buildplate". The pattern used is here is "triangles" and the infil density is set to 30. You can use this or play with the settings to adjust for your needs.

Layer hight was set to 0.1 mm

To download, right click on the link and chose "save link as"

stl file.

Made with Fusion 360